Sand Samplers, Sand Splitters, Sand Washers, Methylene Blue Clay Testers, Sand Sievers, Rapid Dryers, Stick Point Testers, Peel Back Testers, Core Gas Determinator, Hot Tensile Testers
All PRODUCTS
EQUIPMENTS FOR STRUCTURAL PROPERTIES

01

 SAND SAMPLER

 

USE : It is use to collect the representative sand sample.

Specifications : It consist of long pipe having one end Hard Tip with handle

02

 SAND SPLITTER

  USE : It is use to collect the representative sand sample with proper mixing.

Specifications: It consist of long pipe having one end Hard Tip with handle

03

 SAND WASHER

 

USE : It is use to find out clay % of raw sand.

Specifications : Motor - 1/20 Hp Single Phase, Cycles – 50, Speed Regulator, Timer, Glass Jar, Syphon, Wash Bottle, Sieve - 53 Micron Dia. 100 mm.

  EXTRA SIEVE 20 MICRON DIA. 100 MM

04

 METHYLENE BLUE CLAY TESTER

  USE : It is use to find out active clay % of sand.

Specifications: Stirrer - Magnetic Type, Titration Stand, Burette -50 ml., Methylene Blue Bottle.

05

 SAND SIEVER

 
USE :It is use to find out AFS [Fineness No.] of sand

Specifications: Motor - 1/8 Hp Single Phase, Cycles – 50, Sieve Set as per ISS No 53, 75, 106, 150, 212, 300, 425, 600, 850, 1700 Micron. Dia. 200 mm, OR (Sieves As Per Requirement) Timer 0-15 Min.,

 06

 RAPID DRIER

  USE : It is use to drying the sand sample.

Specifications: Infra Red Lamp, 275 Watts, Drying Chamber Drying Pan

EQUIPMENT FOR BENTONITE PROPERTIES

07

 LIQUID LIMIT

USE : It is use to find out liquid limit of Bentonite.

Specifications: Includes Rubber Base, Sliding Carriage, Metallic Bowl, Gauge Block And Grooving Tool

EQUIPMENS FOR SAND PREPARATION

08

 SAND MULLER

USE: It is use to mixing mulling purpose of Green Sand

Specifications : Capacity - 5 Kg [Batch], Motor with Gear Box 1/2 HP Single Phase, Scraper - 2 Nos., Roller - 2 Nos.

09

 SAND MIXER

USE : It is use to mixing for co 2 sand, two parts Nobake sand.

Specifications : Capacity - 10 Kg [Batch], Motor with Gear Box1/2 HP Single Phase, Scraper - 2 Nos.

EQUIPMENTS FOR VARIOUS PROPERTIES OF GREEN SAND

10

 RAPID MOISTURE TESTER

USE: It is use to determine moisture % in Raw sand and Green sand.

Specifications : Capacity 10 % Moisture With Single Pan Balance, Absorbent Compound And Carrying Case

11

 SAND RAMMER

USE: It is use to prepare standard specimen for further test.

Specifications: With Sliding Weight, Lifting And Ramming Cam, Specimen Tube, Pedestal Cup And Stripper.

ATTACHMENTS TO SAND RAMMER

A

 Base Block

B

 Tube Filler

C

 Tensile Core Box

D

 Transverse Core Box

E

 Split Specimen Tu

F

 Compatibility Tester

G

 Flowability Tester

H
 CO 2 GASSING ACCESSORY FOR COMPRESSION SPECIMEN
  USE: It is a accessory to passing the co 2 gas In Standard Specimen.

Specifications: Specimen Holder With Gas Sealing Facility.
I
 CO 2 GASSING ACCESSORY FOR TENSILE SPECIMEN

USE: It is a accessory to passing the co 2 gas In Tensile Specimen.

Specifications: - Tensile Specimen Holder With Gas Sealing Facility
J
 CO 2 GASSING ACCESSORY FOR TRANSVARSE SPECIMEN
  USE: It is a accessory to passing the co 2 gas In Transverse Specimen.

Specifications : Transverse Specimen Holder With Gas Sealing Facility.
12
 PERMEABILITY TESTER
  USE: It is use to determine porosity in Raw sand, Green, Nobake sand.

Specifications :- With Air Tank, Water Tank, Manometer Unit, Permeability Chart,2 Orifices And Syphon Unit
13
 PERMEABILITY TESTER [ELECTRIC]
  USE : It is use to determine porosity in Raw sand, Green & Nobake sand

Specifications : electric blower, Speed Regulator, Pressure Gauge, 2 Orifices

ATTACHMENTS TO PERMEABILITY TESTER

A

 Mold Permeability Tester

B

 Core Permeability Tube

C

 Base Permeability Tube

14

 UNIVERSAL STRENGTH MACHINE [HYDRAULIC]

USE: It is use to determine Compression Shear, Tensile strength Green sand and Nobake sand, co2 sand.

Specification : Suitable For Compression Strength, Tensile Strength, Transverse Strength With The Help Of Attachment, Capacity: For High Gauge 13 Kg/Cm2 On Compression Scale For Low Gauge 1600 Gms/Cm2 On Compression Scale With Compression Pads

15

 UNIVERSAL STRENGTH MACHINE [MECHANICAL AND DIGITAL]

USE : It is use to determine Compression, Shear, Tensile strength of Green sand and Nobake sand, co 2 sand.

Specifications : Suitable For Compression Strength, Tensile Strength, Transverse Strength With The Help Of Attachment, Capacity 15 Kg/Cm2 On Compression Scale With Motorized Loading Mechanism, Load Cell, Digital Strength Indicator And Compression Pads

ATTACHMENTS TO STRENGTH MACHINE

A

High Dry Strength Attachments

B

Shear Strength Attachments

C

Tensile Strength Attachments

D

Transverse Strength Attachments

E

Splitting Strength Attachments

F

Twin Transverse Strength Attachments

G

Deformation Attachments
   

16

 GREEN COMPRESSION STRENGTH MACHINE

USE : It is use to determine Compression strength of Green sand

Specifications : with spring balance (0-2500 gm/cm 2 ), tray

17

 MOULD STRENGTH TESTER

USE : It is use to determine compression strength of Mould.

Specification: With Dial Indicator with Special Tip to Measure Compression Strength on direct Mould. Capacity 2 Kg/cm 2
18
 MOULD HARDNESS TESTER (‘B' SCALE)
USE : It is use to determine surface hardness of Green Mould.

Specification : Dial Indicator To Measure Hardness of Mould 0 - 100 No.
19
  MOULD HARDNESS TESTER (DIGITAL) (‘B' SCALE)
USE : It is use to determine surface hardness of Green Mould.

Specification: Digital Dial Indicator To Measure Hardness of Mould 0 - 100 No.
20
  MOULD HARDNESS TESTER (‘C' SCALE)
USE : It is use to determine surface hardness of Green Mould.

Specification : Dial Indicator To Measure Hardness of Mould 65 - 100 No.
21
  CORE HARDNESS TESTER
USE : It is use to determine surface hardness of Core Mould. Specification : Harden Tip, to Measure Hardness of Cores 0 To 100 No.
22
  MOULDABILITY TESTER
USE : It is use to determine the mouldability index of green sand. Specifications : Sieve Drum, Timer, Infra Red Lamp, Pan & 9.5mm Sieve
23
  SHATTER INDEX TESTER
USE : To determine the Shatter Index of moulding sand. Specification: Pillar, Top Housing Bracket, Anvil, 12.5 mm Sieve, Lid, pan
EQUIPMENTS FOR VARIOUS PROPERTIES OF RESIN COATED SAND
24
  HOT TENSILE TESTER
  USE : It is use to determine Tensile Strength of shell sand in hot condition. Specification : 1) Teflon coated Two Hot Plates, Controlled By Digital Temperature Indicator And Controller (0-300 o c). 2) Loading and unloading mechanisms operated by manually and auto by electronic control. 3) Digital Pressure Indicator to read tensile strength up to 55 kg/cm 2 . 4) Load Cell. 5) Hard crome plated tensile Jaw set. 6) Waste sand collection tray. 7) Jaw Lifting tongue. 8) Sand Filler Cum Scrapper, 9) Cleaning Brush. 10) Working on 230 volt, 50 cycle, 1.6 Kw AC Power Supply.
25
 COLD TENSILE ATTACHMENT TO H.T.S. MACHINE
  Use : To Prepare the standard specimen Specification : Contains standard specimen Jaw
26
 STICK POINT TESTER
  USE : It is use to determine melting point of Resin Coated Sand. Specification : With Heating Unit, Sand Distributor Digital Temperature Indicator And Controller, Brush.
27
 PEEL BACK TESTER
  USE : It is use to determine Pill Off and Build Up property of shell sand.

Specification : Heater-1000 Watts, 230v.A.C. Supply. With Thermostat, Heating Plate, Funnel, Trays
28
 PEEL BACK TESTER [DIGITAL]
  USE : It is use to determine pill of f and build up property of shell sand.

Specification : Heater -1000 Watts, 230V A.C. Supply. With Digital Temp. Indicator Cum Controller, Heating Plate, Funnel, Two Trays
29
 CORE GAS DETERMINATOR
  USE : It is use to determine gas evolution in the shell sand.

Specification : Heater-1200 Watts, 230v.,A.C.Supply.With Furnace Of 1200 o c Cap., Digital Temp. Indicator-Controller, Combustion Tube, Boats, Pusher Measuring Tube.
   30   HOT AIR BLOWER MIXTURE (Mini Coating Plant for Shell Sand)
  USE : It is use to prepare shell sand in hot condition to check the resin properties under standard condition.

Specification : Mixture – Cap. - 5Kg [Batch], Motor with Gear Box1/2 HP Single Phase, Scraper - 2 Nos., window to see the inside process Heating unit – 6 kw, Blower – ¼ hp single phase, 230 AC volts.